Yamaha Ténéré 700 Setup

How do I order and set up CARPE ITER products for my Ténéré 700?

If you have a Yamaha Ténéré 700 and need help selecting the right products, please refer to the following guidelines. The selection differs depending on the year of manufacture:

MY 2025 - present (asymmetrical TFT)

This generation doesn't fit the 2022-2024 bracket, but also, the fairings were reinforced, so there's no longer a need for such an extensive solution. Therefore, we developed a stabilizer to add some stiffness to the stock GPS bar when used with a tablet. The Short bracket 12 fits well to mount the tablet holder to the stock GPS bar.

MY 2022 - 2024 (TFT dashboard)

• We developed a sturdy bracket for this model specifically. It provides a secure platform for mounting navigation devices: Yamaha Tenere 700 GPS Bracket – Carpe Iter Shop 
• Power cable 2-pin or 3-pin will connect it all to the bike's wiring.
  • If you have no electrical accessories, both will work. If you have any electrical accessories installed in this connector, then you need to get the cable matching your available connector.
• To protect the tablet fully it is recommended to use a Windshield Adjuster which raises the stock windshield. An aftermarket windshield is not necessary. Also, an Antivibration adapter will add protection to the device.
  

  Bracket compatibility for specific crash bars:
  Original Yamaha - Frame mount
  SW-motech - Frame mount
  HEED - Frame mount
  Outback Motortek - Mask mount
  Adventure Spec - Frame mount

MY 2019 - 2022 (black and white LCD)

• May use the same bracket as for 2022-2024, but with a few screws replaced. These are included in an extra bag in every set.

GENERAL PARTS - necessary for all the bikes above:

• CI Pad
• Holder
• Power source
• Controller

It can be all ordered here with a 10% discount! -> Build a Kit and SAVE – Carpe Iter Shop

In case something wasn't clear enough or your specific setup requires individual consultations, feel free to reach us: Submit a ticket : Carpe Iter Home